BCLHK - V-26,POLYURETHANE GLOSS VARNISH

  • MSDS: BCLHK
  • Manufacturer: FRANK W DUNNE CO
  • Product Name: V-26,POLYURETHANE GLOSS VARNISH
  • National Stock Number: 8010-00N003972
Product Identification

Product ID:V-26,POLYURETHANE GLOSS VARNISH
MSDS Date:01/01/1985
FSC:8010
NIIN:00N003972
MSDS Number: BCLHK

Responsible Party
FRANK W. DUNNE CO.

Emergency Phone: 415-652-1200

Cage: OO128

Contractor
FRANK W. DUNNE COMPANY
OAKLAND, CA 94608-3618 US

Telephone: (415) 652-1200

Cage: OO128

Ingredients

NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

Fraction By Weight: 50%

OSHA PEL 100 PPM

Hazards

Effects of Overexposure:EYE/SKIN: IRRITATION. VAPORS: HEADACHE &
NAUSEA,EYE & LUNG IRRITATION.

First Aid

First Aid:EYE: FLUSH WITH WATER 15 MINUTES,CONSULT PHYSICIAN. SKIN:
WASH WITH SOAP & WATER. INHALATION: REMOVE FROM EXPOSURE,GIVE ARTIF
RESP IF NEEDED,CONSULT PHYSICIAN. INGESTION: DO NOT INDUCE
VOMITING,GET ME DICAL ATTENTION.

Fire Fighting

Flash Point:102F/38C
Lower Limits:1.0
Extinguishing Media:FOAM,CO*2,DRY CHEMICAL,SAND,NFPA CLASS 'B'
EXTINGUISHER
Fire Fighting Procedures:GENERAL PROCEDURES RECOMMENDED - AVOID USE OF
WATER
Unusual Fire/Explosion Hazard:CONTAINERS MAY RUPTURE DUE TO VERY HIGH
TEMPERATURE INDUCED PRESSURE.

Accidental Release

Spill Release Procedures:ADD SOLID ABSORBENT,SHOVEL OR SCOOP INTO
DISPOSABLE CART,AND HOSE OR WASH DOWN AREA.

Handling

Handling and Storage Precautions:AVOID FLAME & PROLONGED HIGH
TEMPERATURE AS WELL AS LOCALIZED SOLVENT VAPOR BUILD-UP. GROUND
CONTAINERS WHEN POURING,AVOID FREE FALL TO A FEW INCHES
Other Precautions:DO NOT TAKE INTERNALLY,AVOID PROLONGED CONTACT OR
INHALATION.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN
Ventilation:LOCAL
Protective Gloves:PLASTIC
Eye Protection:SAFETY GOGGLES/GLASSES
Supplemental Safety and Health
WEIGHT PER GAL: 7.5#

Chemical Properties

Boiling Pt:B.P. Text:300F/148C
Vapor Density:>1
Evaporation Rate & Reference:<1 (ETHER)
Percent Volatiles by Volume:57

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING MATERIALS
Stability Condition to Avoid:SPARK,FLAME & HIGH TEMPERATURES

Disposal

Waste Disposal Methods:COMPLY WITH LOCAL,STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.